What In rack sprinkler system

In rack sprinkler system
Warehouse fires are very difficult; spread quickly and be huge increases in the shooting rate in a short period of time. This is especially true when it comes to fire commodities such as flammable liquids, paper, and plastic materials at risk. Rack is designed in fire sprinkler systems designed to protect storage areas ridden in warehouses.

In rack and machine-gun fire does not prevent the fire from starting, in fact it depends on the heat from the fire to move them, but it will not help contain the fire in a certain area, and put it out. This in turn reduces the losses caused by the fires and reduce the risk to life from fire.

When ESFR sprinkler systems and eliminate the need to sometimes machine guns in the rack, storage configurations or certain types of construction of buildings will not allow the use of sprinklers ESFR. Usually when storing combustible materials non-combustible or regular exceed 40 feet in height or building exceeds 45 feet in height ESFR sprinklers can not be used as a protection scheme. In the rack and then it can be used machine guns to provide a suitable solution for the protection of way. This arrangement includes the installation of sprinklers installed on a network of pipes inside the storage rack structure. In some cases, this has allowed the installation of rack structures in high-rise buildings such as 100 feet where the building's roof rack support structure itself. In rack sprinklers are used on a large scale in structures that use automated rack use automated picking equipment is computer controlled to store and retrieve pallet quantities of material.

In rack sprinklers provide additional protection within the rack structures with the spacing which can be between 10 and 25 feet vertically between different lines of machine guns. Because there are more sprinklers installed within the rack structure and were relatively close together vertically there is low demand for water to run this machine guns then required by typical ESFR sprinkler. A typical rack will spray in exchange for working on 30gpm 100gpm discharged from the spraying ESFR. Sprinklers in the holder may not allow for the same flexibility in the storage rack configurations that provide sprinklers ESFR but it does not allow for the further rise of the store and then ESFR sprinklers which can be important in view of the volume of printing the foot of the building.